Dell Vostro 430 (Late 2009) - Manual (Page 32)

Back to Contents Page
Power-Button Assembly
Dell™ Vostro™ 430 Service Manual
Removing the Power-Button Assembly
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the Cover .
3. Remove the Front Panel .
4. Disconnect the power-button cable from the system board.
5. Press down on the clips that secure the hard-drive activity light and power-button assembly to the front panel.
6. Pull the hard-drive activity light and power-button assembly away from the computer.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.