Dell S300w Projector - Manual (Page 56)

56 Using Your Projector
In order to use your projector wirelessly, you need to complete the steps below:
1 Install the wireless antenna. See "Installing the Antenna" on page 10.
2 Enable wireless connection on the projector. See "WIRELESS / NETWORK"
on page 46.
NOTE: When you start wireless, please wait about 50 seconds reboot the
Wireless / Network.
3 On INPUT SELECT menu, select Multiple Display and then select Wireless
display on sub-menu. See "INPUT SELECT" on page 36. The Wireless Guide
Screen shown below appears.
4 Take note of the LOGIN CODE, NETWORK NAME (SSID), and IP
ADDRESS. You will need these information to login later.
5 Connect your computer to the S300w network.