Dell Studio Hybrid D140G (Mid 2008) - Manual (Page 8)

6
Setting Up Your Studio Hybrid
Vertical Position
To set up your computer in a vertical position,
align the securing tabs on the stand with the
slots on the computer. Lower the computer onto
the stand until the tabs have fully inserted into
the slots.
Horizontal Position
To set up your computer in a horizontal position:
If the stand has been installed in the vertical 1.
position, gently lift the computer away from
the stand while holding the stand down on a
level surface.
Turn the stand over and push the stabilizer
2.
bar away from the stand.