Dell S500 Projector - Manual (Page 6)

file:///T|/htdocs/ACC/S500/en/SNMP/S500wi%20SNMP%20table-DELL.htm[10/31/2012 8:57:57 AM]
FanErrorCounter+TempSwitchErrorCounter+TempSensorErrorCounter+LightSourceErrorCounter
MP-235 pdmAlertAllAlertsCount .1.3.6.1.4.1.2699.2.4.1.12.1.1.6.42 INTEGER R
AllAlertsCount=
FanErrorCounter+TempSwitchErrorCounter+TempSensorErrorCounter+LightSourceErrorCounter
The rest Object will respond default.
c) If there is Lamp fail alert happen, the tables is shown below
pdmAlertGroupType = “Lamp”
pdmAlertGroupID= Lamp Fail
pdmAlertSeverity = Critical (3)
The rest Object will respond default.
d) If there is Lamp hours running out alert happen, the tables is shown below
pdmAlertGroupType = “Lamp”
pdmAlertGroupID= Lamp hours running out
pdmAlertSeverity = warning (4)
The rest Object will respond default
e) If there is Projector Over-heating alert, the tables is shown below
pdmAlertGroupType = “ThermalSensor”
pdmAlertGroupID= “Projector Overheating”
pdmAlertSeverity = warning (4)
The rest Object will respond default.
f) If there is Lamp Over-heating alert, the tables is shown below
pdmAlertGroupType = “ThermalSwitch”
pdmAlertGroupID= “Lamp Overheating”
pdmAlertSeverity = Critical (3)
The rest Object will respond default.