Chicago Electric 93853 - Manual (Page 4)

SKU 93853 For technical questions, please call 1-800-444-3353 PAGE 4
Remove adjusting keys or wrenches before turning the power tool on. 4. A
wrench or a key that is left attached to a rotating part of the power tool may result
in personal injury.
Do not overreach. Keep proper footing and balance at all times.
5. Proper
footing and balance enables better control of the power tool in unexpected
situations.
use safety equipment. Always wear eye protection.
6. Dust mask, non-skid
safety shoes, hard hat, or hearing protection must be used for appropriate
conditions.
TOOL uSE AND cARE
use clamps (not included) or other practical ways to secure and support 1.
the workpiece to a stable platform. Holding the work by hand or against your
body is unstable and may lead to loss of control.
Do not force the tool. use the correct tool for your application.
2. The correct
tool will do the job better and safer at the rate for which it is designed.
Do not use the power tool if the power Switch does not turn it on or off.
3.
Any tool that cannot be controlled with the Power Switch is dangerous and must
be replaced.
Disconnect the power cord plug from the power source before making any
4.
adjustments, changing accessories, or storing the tool. Such preventive
safety measures reduce the risk of starting the tool accidentally.
Store idle tools out of reach of children and other untrained persons.
5. Tools
are dangerous in the hands of untrained users.
Maintain tools with care. Keep cutting tools sharp and clean.
6. Properly
maintained tools with a sharp cutting edge are less likely to bind and are easier
to control. Do not use a damaged tool. Tag damaged tools “Do not use” until
repaired.
check for misalignment or binding of moving parts, breakage of parts,
7.
and any other condition that may affect the tool’s operation. If damaged,
have the tool serviced before using. Many accidents are caused by poorly
maintained tools.
use only accessories that are recommended by the manufacturer for your
8.
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.