Dell U2713H Monitor - Manual (Page 9)

Bottom View
Bottom view without monitor stand
Label Description Use
1
AC power cord
connector
Connect the power cable.
2
DC power
connector for
Dell Soundbar
Connect the power cord for the soundbar (optional).
3 Audio Out Connect the soundbar mini stereo plug (Support two channel output ).
4
DisplayPort in
connector
Connect your computer with DP cable.
5
Mini
DisplayPort in
connector
Connect your computer with Mini DP to DP cable
6 DVI connector
Connect your computer with DVI cable. For U2713H, use only DVI dual-link cable provided in box (or
other certified dual-link cable) for this connection only.
7
HDMI
connector
Connect your computer with HDMI cable.
8
DisplayPort out
(MST)
connector
DisplayPort output for MST (Multi-Stream Transport) capable monitor. DP 1.1 monitor can only be
connected as the last monitor in the MST chain. To enable MST, refer to instruction on section
" Connecting the Monitor for DP MST Function ".
9
USB upstream
port
Connect the USB cable that came with your monitor to the computer. Once this cable is connected, you
can use the USB connectors on the monitor.
10
USB
downstream
port
Connect your USB device. You can only use this connector after you have connected the USB cable to
the computer and USB upstream connector on the monitor.
11
Stand lock
feature
To lock the stand to the monitor using a M3 x 6 mm screw (the screw is not provided).
NOTE: Headphone usage is not supported for the audio line out connector.