Dell U2713H Monitor - Manual (Page 14)

Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to
as Power Save Mode*. If the computer detects input from the keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows
the power consumption and signaling of this automatic power saving feature:
VESA Modes Horizontal
Sync
Vertical
Sync
Video Power Indicator Power Consumption
U2413 U2713H
Normal
operation
Active Active Active White 120 W (maximum) **
60 W (typical)
130 W (maximum) **
60 W (typical)
Active-off
mode
Inactive Inactive Blanked
White (fade in and
fade out)
Less than 0.5 W Less than 0.5 W
Switch off - - - Off Less than 0.5 W Less than 0.5 W
The OSD functions only in the normal operation mode. When any button is pressed in the Active-off mode, one of the following messages will be displayed:
Activate the computer and the monitor to gain access to the OSD.
NOTE: This monitor is ENERGY STAR ® -compliant.
* Zero power consumption in OFF mode can only be achieved by disconnecting the power cord from the monitor.
** Maximum power consumption with max luminance, Dell Soundbar, and USB active.