Dell OptiPlex 380 (Late 2009) - Manual (Page 41)

Back to Contents Page
System Board
Dell™ OptiPlex™ 380 Service Manual— Mini-Tower
Removing the System Board
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the memory .
3. Remove the video card .
4. Remove the heat sink .
5. Disconnect the fan cable from the system board.
6. Disconnect the processor power cable from the system board.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.