Casio EXILIM EX-ZS150 - Manual (Page 22)

22
Quick Start Basics
To replace the memory card
Press the memory card and then release it.
This will cause it to pop out of the memory card
slot slightly. Pull the card out the rest of the way
and then insert another one.
• Never remove a card from the camera while
the back lamp is flashing green. Doing so
can cause the image save operation to fail
and even damage the memory card.
Before using a memory card for the first time with the camera, you must format it.
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a memory card on
a computer and then using it in the camera can slow down data processing by the
camera. In the case of an SD, SDHC, or SDXC memory card, formatting on a
computer can result in non-conformity with the SD format, causing problems with
compatibility, operation, etc.
• Before formatting a new Eye-Fi card to use it for the first time, copy the Eye-Fi
Manager install files to your computer. Do this before formatting the card.
1.
Press [ON/OFF] (Power) to turn on the camera and then press [SET].
2.
Use [8] and [2] to select the second Control Panel option from the
bottom (MENU) and then press [SET] (page 32).
3.
Use [4] and [6] to select the “Set Up” tab.
4.
Use [8] and [2] to select “Format” and then press [6].
5.
Use [8] and [2] to select “Format” and then press [SET].
To format (initialize) a new memory card