Dell Projector 3200MP - Manual (Page 24)

Power Saving
Use this function to select the power saving delay period. Press "Yes" to go into the "set time" sub
menu.
Set Time(Min)
Set the power saving delay period as you prefer. When the projector is not receiving an
input signal for the selected period of time, the projector will automatically enter power
saving mode, and turn off the lamp. After a one-minute cooling period, the projector will
turn back on with detection of an input signal or by pressing the "Power" button.
Language Menu
Language
Language
Press or to select the language you prefer.
Factory Reset Menu