Dell Alienware Aurora ALX (Late 2009) - Manual (Page 26)

26 CHAPTER 4: USING YOUR DESKTOP
RAID Level 5
RAID level 5 uses data parity. RAID level 5 stripes both data and parity information
across three or more drives. It provides data striping at the byte level and also
stripe error correction information (rotating parity array). This results in excellent
performance and good fault tolerance.
If a drive failure occurs, subsequent read and write operations are directed to the
other surviving drives. A replacement drive can then be rebuilt using the data
from the surviving drives. Since data is duplicated on the primary and additional
drives, four 120 GB collectively have a maximum of 360 GB on which to store
data.
A1
B1
C1
Dp
A2
B2
Cp
D1
A3
Bp
C2
D2
Ap
B3
C3
D3
RAID Level 10
A RAID 10 array combines the high data access rate of a RAID level 0 array and the
data protection (redundancy) of a RAID level 1 mirror by striping data across two
drives and mirroring that striped data on a set of two drives.
RAID 1+0
If a drive failure occurs, subsequent read and write operations are directed to the
other surviving drives. A replacement drive can then be rebuilt using the data
from the surviving drives. Also, because data is duplicated on the primary and
additional drives, four 120 GB collectively have a maximum of 240 GB on which
to store data.