Dell Inspiron 518 (Mid 2008) - Manual (Page 34)

34
Troubleshooting
3 If a problem is encountered during a test, a message appears with an error
code and a description of the problem. Write down the error code and
problem description and see "Contacting Dell" on page 57.
NOTE:
The Service Tag for your computer is located at the top of each test
screen. If you contact Dell, technical support will ask for your Service Tag.
4 If you run a test from the Custom Test or Symptom Tree option, click the
applicable tab described in the following table for more information.
5 When the tests are complete, close the test screen to return to the Main
Menu screen. To exit the Dell Diagnostics and restart the computer, close
the Main Menu screen.
6 Remove the Drivers and Utilities media (if applicable).
Tab Function
Results Displays the results of the test and any error
conditions encountered.
Errors Displays error conditions encountered, error codes,
and the problem description.
Help Describes the test and may indicate requirements for
running the test.
Configuration Displays your hardware configuration for the
selected device.
The Dell Diagnostics obtains configuration
information for all devices from system setup,
memory, and various internal tests, and it displays
the information in the device list in the left pane of
the screen. The device list may not display the
names of all the components installed on your
computer or all devices attached to your computer.
Parameters Allows you to customize the test by changing the
test settings.
book.book Page 34 Wednesday, July 2, 2008 1:51 PM