If the light on the right is off, the media base is not detecting a network connection. Try replacing the network cable. The light on the
right blinks yellow when the network is active.

The light on the left indicates the link speed:

Solid Green —

Connection speed is 10 Mbps.

Amber —

Connection speed is 100 Mbps.

Yellow —

Connection speed is 1 Gbps.

For information on using the network adapter, see the documentation that came with your computer.

NOTICE:

Do not plug a telephone cable into the network connector.

USB 2.0 connectors —

Connects up to two USB 2.0-compliant devices.

AC Adapter connector —

Connects an AC adapter to the media base and to AC power to convert AC power to the DC power required by

the media base. You can connect the AC adapter with your media base either turned on or off. For more information, see

Setting Up Your

Media Base

CAUTION:

If you are using a multiple-outlet power strip, use caution when you plug the AC adapter power cable into the

power strip. Some power strips may allow you to insert the plug incorrectly. Incorrect insertion of the power plug could
result in permanent damage to your media base, as well as risk of electric shock and/or fire. Ensure that you insert the
ground prong of the power plug into the mating ground contact of the power strip.

NOTICE:

When you disconnect the AC adapter from the media base, hold the adapter cable connector, not the cable itself, and

pull firmly but gently to avoid damaging the cable.

IEEE 1394 connector —

Connects devices supporting IEEE 1394 high-speed transfer rates, such as some digital cameras and video