Dell 4210X Projector User Manual
Page 25
Using Your Projector
25
1
LAMP warning light
If the LAMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Lamp is reaching its end of usable life
• Lamp module is not properly installed
• Lamp driver failure
• Color wheel failure
For more information, see "Troubleshooting Your
Projector" on page 62 and "Guiding Signals" on
2
TEMP warning light
If the TEMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Internal temperature of the projector is too
high
• Color wheel failure
For more information, see "Troubleshooting Your
Projector" on page 62 and "Guiding Signals" on
3
Power
Turns the projector on or off. For more
information, see "Turning Your Projector On" on
page 20 and "Turning Your Projector Off" on
4
Up
/ Keystone
adjustment
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+40/-35 degrees).
5
Right
/ Auto Adjust Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to synchronize the projector to the input
source.
NOTE:
Auto Adjust does not operate if the
on-screen display (OSD) is displayed.
6
IR Receiver
Point the remote control towards the IR receiver
and press a button.