Plug and play capability, Universal serial bus (usb) interface – Dell U2913WM Monitor User Manual
Page 17
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using
Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings if
desired. For more information about changing the monitor settings, see
Universal Serial Bus (USB) Interface
This section gives you information about the USB ports that are available on the left side of your monitor.
NOTE:
The USB ports on this monitor are USB 3.0 compliant.
Transfer speed
Data
Rate
Power Consumption
SuperSpeed
5 Gbps
4.5 W (Max., each port)
Hi-Speed
480 Mbps
2.5 W (Max., each port)
Full speed
12 Mbps
2.5 W (Max., each port)
Low speed
1.5 Mbps
2.5 W (Max., each port)
USB Upstream
Connector
USB Downstream
Connector
Pin Number Signal Name
1
VBUS
2
D-
3
D+
4
GND
Pin Number Signal Name
1
VBUS
2
D-
3
D+
4
GND