Dell PowerEdge C410x - Manual (Page 51)

IP Control By Button | 51
9
IP Control By Button
Static/DHCP IP Controlled by Front Panel
Button
To switch from DHCP to static or vice versa:
1. Hold down the ID button for 5 seconds.
2. While pressing the ID button, press and hold the power button for 5
seconds.
3. Release the power button, and then the ID button.
4. It will take ~30 seconds to change the configuration.
5. The ID light indicates which mode has been selected:

Solid for 5 seconds indicates static IP

Flashing for 5 seconds indicates DHCP
Every time you change the IP mode to static, BMC IP will restore to the default
settings. Default static IP address is “192.168.0.120”.
The power button does not work during the power on/off period.
2