Dell OptiPlex XE (Early 2010) - Manual (Page 2)

2 Use the DCM BIOS configuration feature to set ASF mode to DASH and
ASF 2.0.
3 Use the DCM Power Control Task to restart the client computer.
Low Power Mode
Low Power Mode is enabled by default on your computer. The power to the
network ports is disabled when the computer is turned off, or hibernate mode
when LPM is enabled.
NOTE:
Out-of-band (OOB) management features like wake-on-LAN (WOL) will function
only if the network ports are powered.
NOTE:
Enabling TruManage will automatically disable LPM for the TruManage
network port (network port 2) only. To locate the network ports on your computer, see
the Setup and Features Information tech sheet that shipped with your computer.
To enable other OOB features on both the network ports, disable
Low Power Mode in System Setup.
TruManage Alerts
TruManage will alert you through the DCM console if any of the monitored
computer has hardware, environmental, or thermal failures.
Environmental and Thermal Failures
TruManage will notify you if the fan speed or the temperature is at
abnormal levels.
Fans monitored:
• Processor Fan
• Hard drive Fan
• Power Supply Unit Fan
Temperatures monitored:
• Processor Temperature
• System Ambient Temperature
• Power Supply Unit Temperature
5434.fm Page 10 Wednesday, January 13, 2010 11:21 PM