Dell OptiPlex XE (Early 2010) - Manual (Page 5)

Setting the Auto run Feature
To set the Auto run feature:
1 Click the Configuration tab on the Watchdog Timer’s application interface.
2 Select Auto run when system starts up check box to automatically start
Watchdog Timer when your computer starts.
Enabling the Program Status Monitor Log
Program log files will display the status of each program that is monitored and
tracked over different intervals of time.
To enable the Program Status Monitor Log:
1 Click the Configuration tab on the Watchdog Timer’s application interface.
2 Click the
icon to view the log files of all the programs that are monitored
and tracked by Watchdog Timer.
________________
Information in this document is subject to change without notice.
© 2010 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is
strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, and OptiPlex are trademarks of Dell Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or
other countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the
marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade
names other than its own.
54352.fm Page 13 Monday, July 19, 2010 9:27 AM