Casio EX-M2 - Manual (Page 72)

OTHER SETTINGS
72
OTHER SETTINGS
Turning the Key Tone On and Off
Use the following procedure to turn the tone that sounds
when you press a key on and off.
1. In the REC mode or PLAY mode, press MENU.
2. Select the “Set Up” tab, select “Beep”, and
then rock the controller to the right.
3. Rock the controller up or down to select the
setting you want, and then click.
Specifying an Image for the Startup Screen
You can specify an image you recorded with the camera as
the startup screen image, which causes it to appear on the
monitor screen for about two seconds whenever you turn on
the camera.
1. Enter the REC mode or the PLAY mode.
2. Press MENU.
3. Select the “Set Up” tab, select “Startup”, and
then rock the controller to the right.
4. Rock the controller left or right to display the
image you want to use as the startup image.
5. Rock the controller up or down to select the
setting you want, and then click.
Select this:
On
Off
To do this:
Turn on the key tone
Turn off the key tone
Select this:
On
Off
To do this:
Use the currently displayed image as
the startup screen image
Disable the startup screen