Casio EX-Z500 - Manual (Page 62)

BASIC IMAGE RECORDING
62
To do this:
Have the flash fire automatically when
required (Auto Flash)*
Turn off the flash (Flash Off)
Always fire the flash (Flash On)
Fire a pre-flash followed by image
recording with flash, reducing the
chance of red-eye in the image (Red-
eye reduction)
In this case, the flash fires automatically
when required
Select this setting:
* appears momentarily when you select Auto as
the flash mode, and then disappears.
2. Press the shutter button to record the image.
DISP
MENU
SET
BS
[ ̄ ] ( )
Flash mode indicator
Using the Flash
Perform the following steps to select the flash mode you
want to use.
• The approximate effective range of the flash is shown
below.
Wide Angle Optical Zoom:
Approximately 0.4 to 2.4 meters
(1.3´ to 7.9´) (ISO Sensitivity: Auto)
Telephoto Optical Zoom:
Approximately 0.4 to 1.3 meters
(1.3´ to 5.6´) (ISO Sensitivity: Auto)
* Depends on zoom factor.
1. In the REC mode, press [
̄] ( ).
• Each press of [ ̄] ( ) cycles through the flash
mode settings described below on the monitor
screen.