Dell 1100MP - Manual (Page 21)

Using Your Projector
21
Language Menu
Press the or button on the control
panel or the
or button on the remote
control to select the preferred language for
the OSD.
Presss the
on the control panel or the
Menu button on the remote control to
confirm the language selection.
Factory Reset Menu
Select Yes to reset the projector to its
factory default settings. Reset items
include both computer image and video
image settings.
Computer Image Menu
NOTE:
This menu is only available connected to a computer.
F REQUENCY — Change the display data clock
frequency to match the frequency of your
computer graphics card. If you see a vertical
flickering bar, use Frequency control to
minimize the bars. This is a coarse adjustment.
T RACKING — Synchronize the phase of the
display signal with the graphics card. If you
experience an unstable or flickering image, use
the Tracking to correct it. This is a fine
adjustment.
NOTE:
Adjust the Frequency first and then the Tracking.