Canon CanoScan 3200F - Manual (Page 18)

Specifications
16
Specifications
*1 16 bit output supports only for film scanning.
*2 USB 2.0 Hi-Speed mode. Transfer time to computer is not included.
*3 Calibration processing time is not included.
*4 Type of AC adapter depends on the area where the scanner is purchased.
• Specifications are subject to change without notice.
CanoScan 3200 CanoScan 3200F
Scanner Type Flatbed
Scanning Element CCD 6-line color
Light Source Cold cathode fluorescent lamp
Film Adapter Unit - Standard equipped
Optical Resolution 1200 x 2400 dpi
Selectable Resolution 25 - 9600 dpi (ScanGear CS)
Scanning Bit Depth
Color 16 bit input / 16 bit or 8 bit output for each color (RGB)
Grayscale 16 bit input / 16 bit or 8 bit output *1
Scanning Speed *2
(Photo or Document)
Color 2 msec./line (600 dpi), 3.6 msec./line (1200 dpi)
Grayscale, B&W 2 msec./line (600 dpi), 3.6 msec./line (1200 dpi)
Scanning Speed *2 (Film) Color, GrayScale, B&W - 8 - 128 msec./line (1200 dpi)
Preview Speed *3 Approximately 2.6 sec.
Interface
USB 2.0 Hi-Speed,
USB (USB 1.1 equivalent)
Maximum Document Size A4/Letter: 216 x 297 mm (8.5 x 11.7 in.)
Film Type/Number of Frames
-
35 mm strip (negative/
positive)/1 frame
-
35 mm slide (negative/
positive)/1 frame
Scanner Buttons 4 buttons: COPY, SCAN, FILE, E-MAIL
Operating Range
Temperature 10
°
C to 35
°
C (50
°
F to 95
°
F)
Humidity
10% to 90% RH, 20% to 80% RH when scanning film
(without condensation formation)
Power Requirements AC adapter (100/120/230/240V) *4
Power Consumption
In operation: 15 watts maximum, Stand-by: 5.3 watts (Using
supplied AC adapter)
Maximum Exterior Dimensions 259 x 474.7 x 74.7 mm (10.2 x 18.7 x 2.9 in.)
Weight
Approximately 2.5 kg
(5.5 lbs.)
Approximately 2.7 kg
(5.9 lbs.)
• Before you upgrade to Windows XP from Windows 98/Me/2000, you must uninstall
ScanGear CS and CanoScan Toolbox using the “Uninstall the Software” menu of the
CanoScan Setup Utility CD-ROM. The scanner may not work if you upgrade to Windows
XP with these programs still installed. After upgrading to Windows XP, reinstall
ScanGear CS and CanoScan Toolbox according to the steps on page 3. For details, please
read the “Troubleshooting” section of the Scanning Guide (HTML format manual).