Compaq FP745A - Manual (Page 6)

4
Installation
Before installing your monitor, place it in a convenient, well-ventilated location near your computer,
ensure that power to your computer and other peripheral devices is turned off, and proceed as follows:
1. Remove the back panel, neck panel, then connect the blue monitor video signal cable to the back
of the monitor. Tighten the screws on the end of the connector.
IMPORTANT: When connecting cables, ensure that that all cables are placed securely in the slot
provided on the back of the monitor.
2. Connect the opposite end of the blue monitor video signal cable to socket on the back of the
computer.
IMPORTANT: Ensure that the signal cable aligns with the 15-pin connector. Do not force the cable onto
the connector or you may damage the signal cable.
3. Connect the DC power cable from the AC (power) adapter to the back of the monitor. Connect the
lime green audio (speaker) cable to the back of the monitor.
4. Connect the opposite end of the green audio (speaker) cable to the audio out connector on the
rear of the computer.
5. Connect the power cord to the AC (power) adapter.
(Installation instructions continued on next page)