Cornea Systems CT1702 - Manual (Page 39)

CONFIGURING & ADJUSTING the Display: External Devices (S-VIDEO) Mode
39
CONFIGURING & ADJUSTING the Display:
External Devices (S-VIDEO) Mode
Using the system’s On Screen Displays (OSD), you can adjust and refine
your Monitor’s image.
The following table describes the initial set-up steps and the other menus
available.
Remember, when using the buttons on the front of your Monitor :
• Press the MENU button to display the Main Menu.
• Use the CHANNEL ▲ ▼ buttons to scroll through the menu
items.
• Press the SELECT button to choose the desired menu item and
to store the new value/parameter.
• Use the VOLUME buttons to increase/decrease the
value/parameter.
Initial Set-Up & Adjustment of the Monitor
Select the Input Source Mode
1. After all the connections are
made, turn ON the Monitor and
other devices, as appropriate.
2. Select the Input Source mode by
using either the Remote Control:
•Pressing (repeatedly) the
SOURCE button
OR
The buttons on the front of the
Monitor by:
•Pressing the SELECT button
(repeatedly) to scroll through
the various Input Source
modes
OR
•From the Main Menu, choose
the SELECT INPUT (CT1503)/
SETUP option (CT1702).
3. Select the S-VIDEO mode.
CT1503 Input Source Scroll Sequence:
CT1702 Input Source Scroll Sequence:
Digital S-Video Tuner Analog
Digital Composite S-Video Tuner Analog