Vertical Communications 8412S - Manual (Page 62)

7.6 Entering Account Codes
If the installer has arranged your system for account code entry*, your
display may prompt you to enter an account code before dialing or after
answering a call. Depending on how the installer programmed your
system, these account codes may be “forced”(mandatory) for dialing
outside numbers.
*
System must be activated through installer programming to accept account codes.
NOTE: You can program a button on your telephone that will make
the account code entry process quicker. Refer to the
programming section of this user’s guide for details.
•
To enter account code on an incoming call,
1. Press ACCOUNT CODE.
—OR—
Press preprogrammed ACCOUNT CODE button.
—OR—
Press INTERCOM, then dial ✳04 (call is automatically placed
on hold but will return from hold after you’ve dialed the account
code).
2. Dial account code.
•
To enter account code on an outgoing call,
1. Press line button (LCD will prompt for “Account Code” if
programmed to do so).
2. Press ACCOUNT CODE.
3. Dial account code.
4. Listen for dial tone and dial number you are calling.
NOTE: If you hear an error tone after you have dialed your account
code, check the number for validity.
7 – 4 Large Screen Speakerphone Manual
Using The Other Telephone Features GCA70–349