Vertical Communications 8412S - Manual (Page 41)

3.8 Camping On At A Busy Station
And Waiting For An Automatic Callback
If you call another station and receive a busy signal or a Do Not Disturb
tone, you can press a button that will cause the system to ring your
telephone when the station is available. This is called “camping on at a
station.” Please note that you can camp on to only one station at a time.
•
To camp on at any busy station,
1. Press CAMP ON.
2. Your telephone immediately hangs up. When the station you
called becomes available, your telephone will ring with five short
tone bursts.
•
When you hear five short tone bursts,
1. Press INTERCOM. The other telephone will start ringing.
2. If you do not press INTERCOM after the ring back tones within
the time limit set by the installer, the call back is canceled at that
time; however, you can cancel automatic call back at any time
before your telephone sounds the tone bursts.
•
To cancel the call back before your telephone sounds the tone bursts,
1. Press INTERCOM and dial # 6.
•
To camp on at a station with a Do Not Disturb condition set,
1. Press CAMP ON. A call back will occur when called station is no
longer set in the Do Not Disturb mode.
Large Screen Speakerphone Manual 3 – 11
GCA70–349 Making Calls