Transmitter programming, Accidentally remote starting the vehicle – Crimestopper Security Products RS900ER User Manual
Page 8

accidentally remote starting the vehicle.
!! WARNING !!: Remove main power fuse before jump starting or charging a dead or low vehicle battery
TRANSMITTER PROGRAMMING
TRANSMITTER PROGRAMMING:
Note: All transmitter codes must be learned at time of programming!! The RS900 allows storage of up to 4 
different transmitter codes. 
1. Open Hood. 
2. Turn key to the ON position. (Doors will lock if Autolock is programmed) 
3. Press Programming button 4 times, then after a few seconds the unit flash the parking lights 4 times. 
4. Press button #1 of the transmitter to be coded. You should get light flashes with each code learned. If all 4 code 
locations are learned, the unit will automatically exit code learning mode, otherwise turn key off and close hood.
TRANSMITTER PROGRAMMING:
IGN
OFF
WAIT FOR
4 FLASHES
PRESS 4X's
FLASH
START
C
RIM E
S
TOPPER
 
CRIMESTOPPER SECURITY PRODUCTS, INC. 1770 SOUTH TAPO ST. SIMI VALLEY, CA. 93063 
