Clarion DXZ868RMP - Manual (Page 21)

English
280-8337-00
DXZ868RMP
21
Selecting PTY
1. Press the [MODE] button.
2. Touch [PTY SELECT].
3. Touch on the right of the display to
select PTY.
∗ Below are the factory default settings
stored:
4. The PTY select mode is cancelled
automatically 7 seconds after, or touch
[RTN].
PTY seek
1. Press the [MODE] button.
2. Touch [PTY SELECT].
3. Either touch on the right of the
display, or touch [PTY-]/[PTY+] to select
PTY.
4. Touch on the left of the display.
When is touched, this unit seeks a PTY
broadcast moving up the frequencies, while
when
is touched it seeks moving down
the frequencies.
∗ If no station with the selected PTY
broadcast can be received, this unit
returns to the previous mode.
RDS Operations
Auto store function for TP
stations
You can automatically store up to 6 TP stations
to preset memory. If the number of TPs that can
be received is less than 6, broadcast stations
already stored in memory are left without being
overwritten.
1. Make sure that “TA” is displayed.
If “TA” is not displayed, press the [TA] button
to display “TA”.
2. Touch and hold [PS/AS] for 2 seconds or
longer.
“A-STORE” is displayed and the preset No.
in the auto-store operation appears on the
preset No. display.
• TP stations with good reception sensitivity are
stored to preset memory.
• Even if you select FM1 or FM2, a TP station is
stored to memory for FM3.
PTY
This function enables you to listen to a
broadcast of the selected programme type even
if this unit is in a function mode other than radio.
• The factory default setting is “OFF”.
• Some countries do not yet have PTY
broadcast.
• In the TA standby mode, a TP station has
priority over a PTY broadcast station.
■ To set the PTY standby mode
1. Press the [MODE] button.
2. Touch [PTY].
“PTY” lights in the display and the PTY
standby mode is turned on.
When the selected PTY broadcast starts,
the PTY item name appears in the display.
■ To cancel the PTY standby mode
1. Press the [MODE] button.
2. Touch [PTY].
“PTY” goes off in the display and the PTY
standby mode is cancelled.
■ To cancel a PTY interrupt broadcast
Press the [TA] button during the PTY interrupt
broadcast. The PTY interrupt broadcast is
cancelled and this unit returns to the PTY
standby mode.
Preset
PTY item
number ENGLISH Contents
P1 News News
P2 Info Information
P3 Pop M Pop Music
P4 Sport Sport
P5 Classics Serious Classical Music
P6 Easy M Easy Listening Music