Clarion DXZ868RMP - Manual (Page 20)

English
20
DXZ868RMP
280-8337-00
REG (Regional programme)
function
When the REG function is ON, the optimum
regional station can be received. When this
function is OFF, the optimum station for that
region is received if the regional station area
switches as you drive.
• The factory default setting is “OFF”.
Notes:
• This function is disabled when a national station
such as BBC R2 is being received.
• The REG function ON/OFF setting is valid when
the AF function is ON.
■ To switch the REG function ON/OFF
1. Press the [MODE] button.
2. Touch [REG].
“REG” lights in the display.
To switch the REG function OFF, repeat
steps 1 and 2.
Manually tuning a regional
station in the same network
• This function is valid when the AF function is
ON.
• The operation differs according to the ON/
OFF setting of the REG function. When the
REG function is ON, broadcasts having a
perfectly matching PI code can be received.
When the REG function is OFF, broadcasts of
the same type of PI code can be received.
Notes:
• This function can be used when a regional
broadcast of the same network is received.
• The PI code is a coding system that is unique to
each broadcast station.
1. Touch [PRESET].
The preset memory No. list is displayed.
2. Touch the preset memory No. of the
broadcast to be received.
TA (Traffic Announcement)
When a traffic announcement broadcast starts
in the TA standby mode, the traffic
announcement broadcast is received as top
priority regardless of the function mode so you
can listen to it. Traffic programme (TP) automatic
tuning is also possible.
• This function can only be used when “TP” is lit
in the display. When “TP” is lit, this means that
the RDS broadcast station being received has
traffic announcement programmes.
■ To set the TA standby mode
If you press the [TA] button when only “TP” is lit
in the display, “TP” and “TA” light in the display,
and this unit is set to the TA standby mode until
a traffic announcement is broadcast. When a
traffic announcement broadcast starts, “TRA
INFO” appears in the display. If you press the
[TA] button while a traffic announcement
broadcast is being received, the traffic
announcement broadcast reception is cancelled
and this unit enters the TA standby mode.
■ To cancel the TA standby mode
With “TP” and “TA” lit in the display, press the
[TA] button. “TA” in the display goes off and the
TA standby mode is cancelled.
• If “TP” is not lit, pressing the [TA] button
searches for a TP station.
■ To search for a TP station
If you press the [TA] button when “TP” is not lit,
“TA” in the display lights and this unit
automatically receives a TP station.
Note:
• When a TP station cannot be received, “TP
SEEK” is displayed, and the search for the TP
station is continued. When the [TA] button is
pressed again, “TA” and “TP SEEK” in the display
go off, and the search for the TP station ends.
RDS Operations