Clarion VMA7192 - Manual (Page 5)

PICTURE ADJUSTMENT
To adjust the picture brightness, contrast, tint, color, etc., use the Picture + and -
buttons located on the front panel of the VMA7192. Press the + button to
increase the picture brightness, contrast, etc. Press the - button to decrease
the picture brightness, contrast, etc.
CARE AND MAINTENANCE
Cleaning the cabinet:
Use a soft, dry cloth to gently wipe off any dirt.
Do not use benzene, thinner, car cleaner, etc., as these substances may
damage the cabinet or cause the paint to peel.
Cleaning the LCD panel:
Use a soft, dry cloth to gently wipe off any dust.
The surface is easily scratched; do not rub it with hard objects.
SPECIFICATIONS
GENERAL SPECIFICATIONS:
Power Requirement:
DC 12V (9-16V)
Power Consumption: 0.8A Max. (0.8A or Less)
Weight: 1.3lb (0.6kg)
Dimensions: 7-3/8" x 5-1/8" x 1"
(188 x 130 x 36mm) (W x H x D)
Operation Temperature: +5º ~ +40º C
Supplied Accessories: Extension Cable with (male connectors
Video 1 Input, Video 2 Input, Power
Connector, 3.5mm IR Remote Out),
Mounting Hardware
50cm 2 Pin Power cable
MONITOR SPECIFICATIONS:
Display Type:
Color TFT Active Matrix LCD
Screen Size: 7" wide screen
Pixels: 1440 x 234
Screen Resolution: 336,960 Dots
Video System: NTSC/PAL
M3 X 5 Threaded
Side Mounts
Painted Paper
Hole Covers
4
MOUNTING OPTIONS
Your Clarion VMA7192 monitor, has four (4) additional side threaded mounting
holes, and is useable with all Clarion's mounting bracket methods. The slot on the
back of the VMA7192 also accommodates dash-mount installations. In addition
to this, the VMA7192 fits perfectly into all Clarion console shrouds, as well as our
new headrest mounting bracket, HRM-150.
1/4-20 Threaded
Insert
OWNER’S MANUAL