Dell Alienware Aurora R2 (Early 2010) - Manual (Page 24)

024
024
/
CHAPTER 5: DRIVE(S)
Replacing the Hard Drive(s)
Follow the instructions in “Before You Begin” on page 1. 6.
See the documentation that shipped with your new hard drive and ensure 2.
that the jumper positioning is correct.
Snap the hard-drive bracket on to the new hard drive (if applicable).
3.
Slide the hard-drive assembly into the hard-drive cage until the release tabs 4.
snap into place.
Connect the power and data cables to the hard-drive assembly
5.
(if applicable).
Replace the left side-panel (see “Replacing the Left Side-Panel“ on page
6. 11).
Connect your computer and devices to electrical outlets and then turn 7.
them on.