Dell PowerEdge M710 - Manual

Product Information Update
System Power Specifications
Table 1 updates the power specifications listed in the NOM Table in your
Product Information Guide.
Table 1. Power Specifications in NOM Table
NOTE:
Your system must be connected to a Type B connection or permanently-
connected power distribution unit (PDU). If your system is connected to a
single-phase power source, the system power requirements are 200-240 VAC,
50/60 Hz, 60A. If your system is connected to a three-phase power source,
the system power requirements are 200-240 VAC, 50/60 Hz, 30A. For more
information about the service connection, see the PDU guide.
____________________
Information in this document is subject to change without notice.
© 2007 Dell Inc. All rights reserved. Printed in the U.S.A.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly
forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks
and trade names other than its own.
Modelo Voltaje de alimentación Frecuencia Consumo eléctrico
BMX01 200-240 V CA 50/60 Hz 30A
10G-MAG 12 VDC 33.33A
10G-TOM 12 VDC 35A
October 2007
GN544ts0.fm Page 9 Tuesday, October 23, 2007 9:28 AM