Vertical Communications Scout II - Manual (Page 24)

•
To cancel all call forward,
1. Lift handset and listen for intercom dial tone.
2. Dial # 5.
NOTE: For each intercom call received during call forward, a ring
reminder (short tone burst) will be heard at the called station to
remind the user that calls are being forwarded.
7.5 Using Automatic Call-Back
•
To arrange for the system to call back when a busy station
becomes idle or rings with no answer,
1. Make intercom call. Hear busy signal or ring-back tone.
2. Dial ✳ 6,
3. Hang up. (When called station becomes idle or is operated by its
user, your station will ring. Call-back is canceled if you do not lift
your handset when you hear this ringing.)
• To answer call-back ring,
1. Lift handset. (Called station will ring. Call-back is canceled if you
do lift your handset.)
•
To cancel automatic call back,
1. Lift handset. Listen for intercom dial tone.
2. Dial # 6.
3. Hang up.
Using The Other Telephone Features GCA70–246
7 – 4 Single Line Station User's Guide