Canon CanoScan LiDe 50 - Manual (Page 15)

Specifications
*1 USB 2.0 Hi-Speed mode. Transfer time to computer is not included.
*2 Calibration processing time is not included.
• Specifications are subject to change without notice.
CanoScan LiDE 50
Scanner Type Flatbed
Scanning Element CIS (Contact Image Sensor)
Light Source 3-color (RGB) LED
Optical Resolution 1200 x 2400 dpi
Selectable Resolution 25 - 9600 dpi (ScanGear CS)
Scanning Bit Depth
Color 16 bit input / 16 bit or 8 bit output for each color (RGB)
Grayscale 16 bit input / 8 bit output
Scanning Speed *1
(Photo or Document)
Color 6.4 msec./line (600 dpi), 12.7 msec./line (1200 dpi)
Grayscale, B&W 3.1 msec./line (600 dpi), 4.2 msec./line (1200 dpi)
Preview Speed *2 Approximately 9 sec.
Interface
USB 2.0 Hi-Speed,
USB 2.0 Full Speed (USB 1.1 equivalent)
Maximum Document Size A4/Letter: 216 x 297 mm (8.5 x 11.7 in.)
Scanner Buttons 4 buttons: COPY, SCAN, FILE, E-MAIL
Operating Range
Temperature 5
°
C to 35
°
C (41
°
F to 95
°
F)
Humidity 10% to 90% RH (without condensation formation)
Power Requirements Supplied via USB port
Power Consumption In operation: 2.5 watts maximum, Stand-by: 1.5 watts
Maximum Exterior Dimensions 258 x 374 x 38 mm (10.1 x 14.7 x 1.5 in.)
Weight Approximately 1.8 kg (4.0 lbs.)
• Before you upgrade to Windows XP from Windows 98/Me/2000, you must uninstall
ScanGear CS and CanoScan Toolbox using the “Uninstall the Software” menu of the
CanoScan Setup Utility CD-ROM. The scanner may not work if you upgrade to Windows
XP with these programs still installed. After upgrading to Windows XP, reinstall
ScanGear CS and CanoScan Toolbox according to the steps on page 3. For details, please
read the “Troubleshooting” section of the Scanning Guide (HTML format manual).