Abbingdon Music Research CD-77 Reference Class - Manual (Page 8)

8
1.2 Setup
CD-77 System Setup (CD-77 + AM-77 + Speaker)
The following diagram graphically illustrates the standard connection of the CD-77 in a two-channel system.
i. Unpack the CD-77 and remove the protective foam insert
from inside the CD well.
ii. Remove the protective sheet from the acrylic front panel.
iii. Ensure the CD-77 is located on a level and solid surface
capable of supporting at least 50 kgs.
iv. Using the spirit level located inside the CD well, check the
CD-77 is on a level platform
v. Connect the desired RCA/XLR interconnect via the left (blue/
white) and right (red) leads to the respective channels at the
rear of the CD-77.
vi. Connect the other end of the interconnect’s respective left
and right channels to the inputs of the amplifier. Adhere to
the correct colour-coding.
vii. Connect the IEC end of the mains power cable to the mains
receptacle of the CD-77 and connect the mains plug into a
mains socket power source.
Optional IC-77
interconnect may be
purchased sepa-
rately