Abbingdon Music Research DP-777 Premier Class - Manual (Page 12)

12
2.3 RC-707 Remote Control
RD1. STANDBY: to place the DP-777 in active/standby mode.
RD2.BRIGHTNESS: 4 different brightness levels including display off.
RD3.kHz/SAMPLING: to cycle through the different output frequencies.
RD4.ZERO JITTER: for the highest sound quality. When engaged, a small “J” will
be displayed. When the GMT Clock System dynamically tracks a change in the clock
frequency, the “J” will flash.
RD5.INPUT selection: to select the previous/next input.
RD6.MUTE: to mute the output.
RD7.AMR: auto-selection of the optimal settings for the best sound quality.
Signal Polarity: hold down the AMR button for 2-3 seconds to change the signal
polarity.
RD8.HD Dual DAC selection: to select:
HD DAC (best with 24/88.2kHz-192kHz recordings) or
Classic DAC (best with 16/44.1-48kHz recordings).
RD9.FILTER: to select:
HD DAC: Organic / MP Listen / Apodising 808 / Traditional.
Classic DAC: Bit-Perfect I or Bit-Perfect II
RD10. VOLUME Up/Down: controls the analogue volume control.
Auto-bypass at full volume (0dB).