AAXA Technologies LED Showtime 3D - Manual (Page 43)

Technical Details
41
THE PROJECTOR DOES NOT TURN ON
Possible Causes Solution
There is no power Check to ensure the power outlet is good. Then
check the power adapter to ensure a proper con-
nection with the wall outlet as well as the projec-
tor. Confirm that the unit is securely plugged in.
The power button was not held long enough To power on the projector, the power button
needs to be depressed for a full 3 seconds. try
holding the power button until the optical engine
turns on
NO PICTURE / FILE NOT SUPPORTED
Possible Causes Solution
The video source is not properly connected or
selected
Check the video source signal to ensure that it
is properly connected. Select the current input
source by choosing the input desired from the
main menu
Incorrect file extension / Video is encoded with
incorrect codec
Please refer to “Specifications” page to see which
file types and codex are supported. Verify that
the file was encoded properly.
Troubleshooting