AAXA Technologies LED Showtime 3D - Manual (Page 42)

Technical Details
40
IMAGE IS BLURRED
Possible Causes Solution
The Projector is not in focus Adjust the focus with the focus adjustment dial
until the image comes into focus
The Projector is offset from plane / angle of
operation
Move the projector so that it is both 180 degrees
and on an evern plane with the screen.
No Sync, No Signal
Troubleshooting
1. Be sure to setup the computer to enable a video signal output. On some
laptops this is done by pressing and holding Function F5 key. If using the
LED Showtime 3D as an external monitor on Windows based systems, this
can be done by selecting “extend my desktop to this monitor”. The native
resolution of the LED Showtime 3D projector is 1280x800. Depending on
the video driver different resolutions may need to be selected for proper
output.