AAXA Technologies P2Jr - Manual (Page 34)

Technical Details
32
Chapter 4
IMAGE IS BLURRED
Possible Causes Solution
The Projector is not in focus Adjust the focus with the focus adjustment dial
until the image comes into focus
The Projector is offset from plane / angle of
operation
Move the projector so that it is both 180 degrees
and on an even plane with the screen.
No Sync, No Signal
Troubleshooting
1. Be sure to setup the computer to enable a video signal output. On
some laptops this is done by pressing and holding Function F5 key. If
using the P2jr as an external monitor on Windows based systems, this
can be done by selecting “extend my desktop to this monitor”.
2. Depending on the video driver different resolutions may need to be
selected for proper output.