beautypg.com

Setup cont – AAXA Technologies M4 User Manual

Page 40

background image

Setup Cont.

Software Update

• A firmware upgrade can be achieved

through two options. Both options
require the user to copy the new
firmware version onto the USB
memory stick.

Option

One – Through the

settings Menu. Insert the USB stick
with the firmware into the USB port
and select the upgrade option
through the Setup menu. The
firmware will upgrade automatically

Option Two – Self Boot. Insert the

USB stick with the

firmware

into the USB port.

Turn off

the projector by using the On/Off
power switch on the side. Then
turn the projector back on by
switching the power switch on the
side to “On”. The red and green
lights on the side of the projector
should begin flashing.
DO NOT REMOVE THE USB STICK.
After several minutes the red and
green lights should become stable.
Wait for the projector to boot by
itself. After the projector boots
verify that the firmware version has
been updated. Remove the USB
stick.

38