AAXA Technologies LED Android - Manual (Page 52)

Technical Details
47
Chapter 6
IMAGE IS BLURRED
Possible Causes Solution
The Projector is not in focus Adjust the focus with the focus adjustment dial
until the image comes into focus
The Projector is offset from plane / angle of
operation
Move the projector so that it is both 180 degrees
and on an evern plane with the screen.
No Sync, No Signal
Troubleshooting
Be sure to setup the computer to enable a video signal output. On some
laptops this is done by pressing and holding Function F5 key. If using the LED
Showtime as an external monitor on Windows based systems, this can be done
by selecting “extend my desktop to this monitor”. The native resolution of the
LED Showtime projector is 1280x800. Depending on the video driver different
resolutions may need to be selected for proper output.