FRIGIDAIRE FGET2765KB - Manual (Page 3)

Accessories information available
on the web at frigidaire.com
USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca
FGET2765K 02/12 © 2012 Electrolux Home Products, Inc.
Specifications
subject to change.
Double Wall Ovens
FGET2765K F / W/B 27" Electric
27" Double Electric Wall Oven
Gallery
Double Wall Oven Specifications
• Product Shipping Weight (approx.) – 265 Lbs.
• Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz
AC only electrical supply with ground required on separate circuit
fused on both sides of line.
• Connected Load (kW Rating) @ 240 / 208 Volts = 8.2 / 6.2 kW
• Amps @ 240 / 208 Volts = 34.2 / 29.8 Amps
• Recommended Circuit Breaker – 40 Amps
• Always consult local and national electric codes.
• Minimum 21" clearance for oven door depth when open.
• Suggested distance from floor is 11-1/2". Minimum required distance
is 4-1/2".
• Minimum 23-1/2" deep cutout dimension is critical for proper
installation, to ensure that oven’s faceplate will fit flush against
cabinet front.
• To adapt oven to fit cutout height greater than 49-1/2", add one
2"-wide wood shim of appropriate height to each side of opening
under oven side rails. Lifting oven will hide larger cutout opening
at top and oven’s 1"-high bottom trim will hide shims at bottom.
(Standard 1"-High Bottom Trim included.)
• To adapt oven to fit cutout height greater than 49-7/8", optional
3"-High Bottom Trim available.
• Full oven base of solid plywood or similar material required,
capable of supporting 300 Lbs.
• Base must be level and cabinet front must be square.
• Double Wall Ovens are NOT approved to be used in stackable or
side-by-side installation.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Optional Accessories
• 3"-High Stainless Steel Bottom Trim – (PN # 903114-901S).
• 3"-High White Bottom Trim – (PN # 903114-9011).
• 3"-High Black Bottom Trim – (PN # 903114-9010).