Casio HA-A34AT - Manual (Page 13)

Connecting the Car Power Cable
Use the dedicated Car Power Cable (DT-827CAC) sold separately for connecting the Car Mounted
Battery Charger (HA-A30CHG with HA-A34AT installed) to the cigarette lighter in your car.
1
After first checking to make sure the power
of the Handheld Terminal is OFF, plug the
Car Power Cable into the AC Adaptor jack on
the back of the Car Mounted Battery Charger.
2
Plug the Car Power Cable into the cigarette
lighter socket of a 12/24 V DC vehicle.
3
Turn on the power. The power indicator lamp
on the Car Mounted Battery Charger lights in
red.
4
The power contacts on the bottom of the
Handhled Terminal are in contact with the
power contacts of the Car Mounted Battery
Charger, and place the Handheld Terminal on
the Car Mounted Battery Charger it clicks
into place. This causes the power indicator on
the Car Mounted Battery Charger to light in
green.
The indicator on the Handheld Terminal
changes from red to green when charging is
complete.
When removing the Handheld Terminal,
press the removal buttons on the left and right
sides of the Car Mounted Battery Charger.
Power Switch(OFF)
POWER
2
1
Power Indicator Lamp
Power Switch (ON)
Power Contacts
Removal Buttons
04.4.21, 5:13 PM Page 13