beautypg.com

French door refrigerators – FRIGIDAIRE FGHN2866PP User Manual

Page 3

background image

Specifications

subject to change.

USA

10200 David Taylor Drive

Charlotte, NC 28262

1-800-FRIGIDAIRE

frigidaire.com

CANADA

5855 Terry Fox Way

Mississauga, ON L5V 3E4

1-800-265-8352

frigidaire.ca

French Door Refrigerators

FGHN2866P 10/14

© 2014 Electrolux Home Products, Inc.

French Door Refrigerator Specifications

Product Shipping Weight (approx.) – 365 Lbs.

An electrical supply with grounded three-prong receptacle is

required. The power supply circuit must be installed in accordance

with current edition of National Electrical Code (NFPA 70) and

local codes & ordinances.

Voltage Rating – 120V / 60 Hz / 15 or 20 Amps

Connected Load (kW Rating) @ 120 Volts = 1.02 kW

Amps @ 120 Volts = 8.5 Amps

Always consult local and national electric & plumbing codes.

Floor should be level surface of hard material, capable of supporting

fully loaded refrigerator.

When installing refrigerator adjacent to wall, cabinet or other appliance

that extends beyond front edge of unit, 20" minimum clearance

recommended to allow for optimum 120° to 180° door swing, providing

complete drawer / crisper access and removal. (Absolute 4-1/2"

minimum clearance will ONLY allow for 90° door swing which will

provide drawer / crisper access with restricted removal.)

To ensure optimum performance, avoid installing in direct sunlight or

close proximity to range, dishwasher or other heat source.

For proper ventilation, front grille MUST remain unobstructed.

Recess electrical outlet when possible.

Water recess on rear wall recommended to prevent water line damage.

Water Pressure – Cold water line must provide between 30 and 100

pounds per square inch (psi).

Copper tubing with 1/4" O.D. recommended for water supply line

with length equal to distance from rear of unit to household water

supply line plus 7 additional feet. Optional Water Supply Installation

Kits available.

Adjustable front rollers to assist with door alignment.

“Built-In Look” Specifications

Minimum opening of 70-1/4" H x 36" W x 28-7/8" D required to allow

for ease of installation, proper air circulation, and plumbing / electrical

connections.

Remove all wall / floor molding prior to installation.

Note: For planning purposes only. Refer to Product Installation Guide

on the web at frigidaire.com for detailed instructions.

FGHN2866P F/P/E

28 Cu. Ft. Standard-Depth

Standard-Depth French Door Refrigerators

(28 & 26 Cu.Ft.) with No Dispenser

Gallery

This manual is related to the following products: