FRIGIDAIRE FGHF2366PF - Manual (Page 3)

Specifications
subject to change.
USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca
French Door Refrigerator
FGHF2366P 10/14 © 2014 Electrolux Home Products, Inc.
French Door Refrigerator Specifications
• Product Shipping Weight (approx.) – 345 Lbs.
• An electrical supply with grounded three-prong receptacle is
required. The power supply circuit must be installed in accordance
with current edition of National Electrical Code (NFPA 70) and
local codes & ordinances.
• Voltage Rating – 120V / 60 Hz / 15 or 20 Amps
• Connected Load (kW Rating) @ 120 Volts = 1.02 kW
• Amps @ 120 Volts = 8.5 Amps
• Always consult local and national electric & plumbing codes.
• Floor should be level surface of hard material, capable of supporting
fully loaded refrigerator.
• When installing refrigerator adjacent to wall, cabinet or other appliance
that extends beyond front edge of unit, 20" minimum clearance
recommended to allow for optimum 120° to 180° door swing, providing
complete drawer / crisper access and removal. (Absolute 4-1/2"
minimum clearance will ONLY allow for 90° door swing which will
provide drawer / crisper access with restricted removal.)
• To ensure optimum performance, avoid installing in direct sunlight or
close proximity to range, dishwasher or other heat source.
• For proper ventilation, front grille MUST remain unobstructed.
• Recess electrical outlet when possible.
• Water recess on rear wall recommended to prevent water line damage.
• Water Pressure – Cold water line must provide between 30 and 100
pounds per square inch (psi).
• Copper tubing with 1/4" O.D. recommended for water supply line
with length equal to distance from rear of unit to household water
supply line plus 7 additional feet. Optional Water Supply Installation
Kits available.
• Adjustable front rollers to assist with door alignment.
“Built-In Look” Specifications
• Minimum opening of 70-1/4" H x 36" W x 25" D required to allow for
ease of installation, proper air circulation, and plumbing / electrical
connections.
• Remove all wall / floor molding prior to installation.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Optional Accessories
• Second Ice Maker Kit – (PN # IMK0023A)
FGHF2366PF 23 Cu. Ft. Counter-Depth
Counter-Depth French Door Refrigerators
(23 Cu.Ft.) with Dispenser
Frigidaire Gallery