beautypg.com

Setting oven controls – FRIGIDAIRE FFEF3048LS User Manual

Page 18

background image

18

SETTING OVEN CONTROLS

Your appliance has been factory calibrated and tested to

ensure an accurate baking temperature. For the first few

uses, follow your recipe times and temperature

recommendations carefully. If you think the oven is cooking

too hot or too cool for your recipe times, you can adjust the

control so the oven cooks hotter or cooler than the

temperature displayed.

To adjust oven temperature:

1. Press bake.

2. Set the temperature to 550°F (287°C) by pressing and

holding the

.

3. Within 2 seconds, press and hold bake until numeric

digit(s) appear. Release bake keypad. The display now

indicates the amount of degrees offset between the

original factory temperature setting and the current

temperature setting. If the oven control has the original

factory calibration, the display will read "0."

4. The temperature can now be adjusted up or down 35°F

(19°C), in 5°F increments by pressing and holding the

or

. Adjust until the desired amount of offset

appears in the display. When lowering the oven

temperature, a minus sign (-) will appear before the

number to indicate that the oven will be cooler by the

displayed amount of degrees.

5. When you have made the desired adjustment, press

clear off to go back to the time of day display.

Adjusting the oven temperature

Oven temperature adjustments made will not affect the

broil or self-cleaning feature temperatures.

If the display is set for Celsius, adjustments made will be in

1°C increments each press of the

or

keys.

DO NOT USE oven thermometers such as those found in

grocery stores to check the temperature settings inside your

oven. These oven thermometers may vary as much as 20 to

40 degrees from actual temperatures.

NOTES

To set the oven lockout feature

1. Press clear off and hold for 3 seconds. “Loc” will

appear in display, the “Door Locked” indicator light will

flash and the motor driven door lock will begin to close

automatically. Allow about 15 seconds for the oven

door to lock. Once the oven door is locked, the current

time of day will appear in the display.

2. To cancel the Oven Lockout feature, press clear off

and hold for 3 seconds. The control will unlock the oven

door and resume normal operation.

DO NOT open the oven door while the indicator light

is flashing. Allow about 15 seconds for the oven door to

lock. Once the oven door is locked, the current time of

day will appear in the display.

If any control pad is pressed with the oven lockout

feature active, “Loc” will appear in the display until the

control pad is released.

NOTES

Setting oven lockout

The control can be programmed to lock the oven door and

lockout the oven control pads.

Operating oven light

(some models)

The interior oven light will automatically turn ON when the

oven door is opened. Press the oven light switch located on

the upper left control panel to turn the interior oven light ON

and OFF whenever the oven door is closed.

The interior oven light is located at the upper left rear wall

of the oven interior and is covered with a glass shield held

by a wire holder. The glass shield must be in place

whenever the oven is in use. To change the interior oven

light, see "Changing the oven light" in the Care & Cleaning

section.

oven light switch

This manual is related to the following products: