Cable Electronics e labs SW808HD - Manual (Page 17)

Matrix Switching System—Instruction Manual Page 13
Operation Examples
Example 1: Synchronously connect the number 1 audio/video input signals to the
number 3 and 4 output channels (Audio and Video enabled).
Operation Example 1
Key LCD Display Operation
OUTPUT
INPUT
1. Press the OUT number
3 key (output channel).
2. When the LCD
number(s) under the 3
on the panel begins to
flash press the IN
number 1 key
The LCD shows 1 at
channel number 3 for
both Audio and Video.
OUTPUT
INPUT
3. Press the OUT number
4 key (output channel),
4. When the LCD
number(s) under the 4
on the panel begins to
flash press the IN
number 1 key
The LCD shows 1 at
channel number 4 for
both Audio and Video.
Example 2: Connect number4 video input signals from channel to number 1, 3, 5 and 6
output channels (Audio disabled and Video enabled).
Operation Example 2
Key LCD Display Operation
1. Press the AUDIO key to
turn off the LED
indicator.
OUTPUT
INPUT
2. Press the OUT number 1
key (output channel).
3. When the Video LCD
number under the 1 on
the panel begins to flash
press the IN number 4
key
The LCD shows 4 at
channel number 1 for
video only.