LaView LV-PC903F4-W - Manual (Page 2)

www.laviewsecurity.com www.LaViewsecurity.com
1. Power Up!
Connect AC power adaptor to the IP Panda
camera and plug into the power socket.
Plug in a Cat5/Cat6 cable and connect
to your router (Cable not included)
Insert the CD that comes in the box into the
PC CD-ROM drive. Open the disc and
double-click “SADP.exe” to install the software.
Copy and paste the camera ip address into
the browser URL. Install any add-on if prompt
from the browser.
Default username is admin and password is “12345”.
4. Installing Your SADP
Simply follow the installation to finish SADP
program. Look for SADP icon on
desktop and double-click to run the program.
Select Wi-Fi tab in the Network setting. The IP
camera will auto search for wireless SSID nearby,
click Search button to refresh the search if your
SSID does not show in the list.
Login ip camera (step 6). Select Configuration ->
Advance Config. -> Network.
5. Assign Non-used IP address for Panda
1. Connect IP
For WIFI Panda Cameras Only!
2. Connect to Your Router
3. Run the CD software 6. Login IP Camera using Browser
2. Configuring Ip camera WIFI
Select the found ip camera, assign an ip address,
subnet mask, and default gateway. Input ip camera
password “12345” and Save the change.
NOTE: Some ip addresses already being used on the network,
therefore please assign correct IP address to your IP camera.
www.laviewsecurity.com
www.LaViewsecurity.com
Select your SSID, input the SSID wireless password,
and click Save to save the wireless connection.