LaView Analog Camera - Manual

Quick Start Guide
LaView Analog Camera
For more information, scan me!
Camera Wiring Camera Wiring Sample
Content may vary by model, including number of channels, cameras,
configuration and hard drive capacity.
Check your package for specific content information
Information on this document is subject to change without notice.
Copyright LaView Eagle-Eye Technology Inc. 2013
1. Open the box and carefully take out the camera unit
2. Connect the camera to a siamese cable
(not included)
BNC Connector For Video, 12V DC Connector For Power
3. Connect the other end of the siamese cable to the back
a surveillance DVR BNC Connector For Video & 12V DC
connector for power.
4. Complete
Trouble Shooting
1. If there is no picture when the power is on, please check the
power supply and wiring if everything is connected correctly.
2. If there’s ripples in picture image, check the power supply or
monitor the peripheral equipments
3. If the picture is abnormal, check the power supply voltage and
check if the cables are connected correctly
Innovation That Secures
DVR Unit
2
1
3
3
CCTV Camera
Siamese Cable
12V DC Power