beautypg.com

Shutdown instructions, Storage, Moving and positioning heater – Desa Tech GCH480 User Manual

Page 11: Propane construction heater

background image

11

12

SHUTDOWN INSTRUCTIONS

1. push in gas control knob slightly and turn clockwise to “off” position. do not force. (a)
2. Turn gas supply off by turning propane tank valve clockwise to close.

Turning burner only OFF (pilot stays lit).

Turn control knob clockwise to “piloT” position. (B)

STORAGE

never store a propane gas tank inside a building or in the vicinity of any gas or oil burning appliance.

when the propane tank is not disconnected from the construction heater, the gas tank and heater must be

stored outdoors in a well ventilated area, out of the reach of children. if for any reason the heater is to be

stored indoors, the tank must be disconnected and stored outdoors in a well ventilated area out of reach of

children, in accordance with the standard for the the storage and handling of liquefied petroleum gases,

ansi / nfpa 58 and csa B149.1, natural gas and propane installation code. The plastic tank valve plug

supplied with your tank must be tightly installed when the tank is disconnected from the heater.

MOVING AND POSITIONING HEATER

There is a brake in each of the front wheels of your heater that helps keep it in place when in use. To engage

the brakes, push the lever down on each wheel. To move the heater, release the brakes, simply by flipping the

levers on both brakes up.

PROPANE CONSTRUCTION HEATER